Related products

• 

  wishlist

  CLOSUREFAST

  ClosureFast™ 
  procedure

  Minimally invasive thermal
  treatment for vein disease
  and varicose veins.
  The ClosureFast procedure uses radiofrequency energy or heat to close the diseased vein, which redirects blood flow to healthy veins, relieving symptoms.

  Before the procedure

  You will have an ultrasound imaging exam of the leg being treated. This exam is important for assessing the diseased superficial vein and planning the procedure.

  During the procedure

  Your doctor will discuss the procedure with you. Here is a brief summary of what to expect:

  • The ClosureFast procedure is performed on an outpatient basis. Your doctor will perform the ClosureFast procedure. Using an ultrasound, your doctor will position a catheter in the diseased vein through a small opening in the skin.
  • The small catheter delivers heat to the vein wall, causing it to shrink and seal the vein. Once the diseased vein is closed, blood will reroute itself to other healthy veins.

  After the procedure

  • You will be taken to the recovery area to rest.
  • Following the procedure, your doctor will apply a simple bandage over the insertion site and will give you compression stockings to aid in the healing process. Your doctor may encourage you to walk and to refrain from extended standing and strenuous activities for a period of time. The average patient typically resumes normal activities within a few days.^1,2
  • Your doctor will recommend follow-up care as needed.

  • Benefits of the ClosureFast procedure

    • Relief of symptoms after two days, with a noticeable improvement in one to two week
    • Minimally invasive outpatient procedure
    • Less pain and bruising than laser treatment
    • Faster recovery than laser treatment
    • Proven results with positive patient experience

     

    • Rapid recovery — on average, patients resume normal activities within a few days
    • Lasting results — the only radiofrequency energy procedure with published long-term clinical data demonstrating safety and efficacy, with a 91.9% closure rate at five years.⁴

    Adverse events can include nerve injury, hematoma, phlebitis, thrombosis, and/or pulmonary embolism.

    Type of therapy
    Thermal shrinkage of the vein wall with radiofrequency energy or heat

    Inpatient or outpatient procedure
    Outpatient procedure

    One- versus two-leg treatment
    Typically, each leg will be treated in separate appointments

    Needle sticks required
    One needle stick for vein access. Typically, 5 to 10 needle sticks for anesthesia.

     

    Typical post-treatment recovery
    Healing of vein access site, anesthetic needle stick sites, and also healing of ablated vein section

    Compression hose
    Required for approximately one week

    Procedure success rate
    91.9% after five years⁴

    ---

    ClosureFast procedure FAQ

    Is the ClosureFast procedure painful?

    Most patients report feeling little, if any, pain during the ClosureFast procedure.³ Your doctor will give you a local or regional anesthetic to numb the treatment area.

    When can I return to normal activity?

    Patients treated with the ClosureFast procedure may resume normal activity more quickly than patients who undergo surgical vein stripping or laser ablation. With the ClosureFast procedure, the average patient typically resumes normal activity within a few days.² For a few weeks following the treatment, your vein specialist may recommend a regular walking regimen and suggest you refrain from strenuous activities (heavy lifting, for example) or prolonged periods of standing.

    When will my symptoms improve?

    Most patients report relief of symptoms after two days, with a noticeable improvement in one to two weeks.

    Is there any scarring, bruising, or swelling after the procedure?

    Most patients report limited to no scarring, bruising, or swelling following the ClosureFast procedure.³

    How is the ClosureFast procedure different from endovenous lasers?

    Both Closure Fast and lasers use thermal technology to deliver heat into the diseased vein, but they each use a different method of delivery. Despite their similarity in using heat, a 2009 study showed that the ClosureFast procedure is associated with lower rates of pain, bruising, and complications and a faster improvement in patients’ quality of life when compared to 980 nm laser ablation.⁴

    How is the Closure Fast procedure different from vein stripping?

    During vein stripping, incisions are made in the groin and calf, and a tool is threaded through the diseased vein to pull the vein out of the leg. With the ClosureFast procedure, only one small incision is made at the insertion site and the vein is then treated and left in place. ClosureFast is a minimally invasive approach that reduces the likelihood of pain and bruising, associated with vein stripping surgery.¹

    Is the ClosureFast procedure covered by insurance?

    Many patients have access to the ClosureFast procedure through their insurance coverage plan. Insurance companies detail access to the ClosureFast procedure and other radiofrequency ablation procedures in coverage policies for varicose veins or chronic venous insufficiency. As with all healthcare procedures, you may also have some cost associated with receiving treatment, such as a copay or coinsurance. Please reach out to your insurance company to discuss your specific plan coverage and potential costs prior to seeking treatment

• 

  wishlist

  Coronary Diagnostic Catheter (OPTITORQUE)

  PRODUCT OVERVIEW

  A complete line of coronary diagnostic catheters designed for superior torque control and precise placement.

  RADIAL-SPECIFIC UNIVERSAL SHAPES

  • Radial Specific curves designed to enable support and alignment during catheterization¹
  • Excellent back-up support for angiography of both RCA and LCA with a single catheter^1,a
  • Universal design eliminates the need for catheter exchanges and potentially shortens procedural and fluoroscopic time

  _{1. DOF Reference}
  <sup>a. when compared to leading competitors
  2. Ikaria article.</sup> 

  OPTITORQUE Classic Shapes

  Shape Category	Product Code 5 Fr / 1.70 mm	Product Code 6 Fr / 2.00 mm	Shape Name (cm)	Length Holes	Side Tip	Shape
  Pigtail	40-5030	40-6030	Straight Pigtail	110	6
  	40-5031	40-6031	Angled Pigtail 155°	110	6
  Judkins Left	40-5040	40-6040	JL 3.5 (Judkins Left 3.5 cm)	100
  	40-5041	40-6041	JL 4.0 (Judkins Left 4.0 cm)	100
  	40-5042	40-6042	JL 5.0 (Judkins Left 5.0 cm)	100
  Judkins Right	40-5043	40-6043	JR 3.5 (Judkins Right 3.5 cm)	100
  	40-5044	40-6044	JR 4.0 (Judkins Right 4.0 cm)	100
  	40-5045		JR 5.0 (Judkins Right 5.0 cm)	100
  Bypass	40-5050	40-6050	Internal Mammary	100
  Amplatz	40-5060		AL 1 (Amplatz Left Small Type)	100
  	40-5061	40-6061	AL 2 (Amplatz Left Middle Type)	100

  UNIQUE DESIGN

  • Designed for coaxial alignment to the ostium, allowing the catheter to sit at the appropriate angle for optimal engagement
  • Large lumen allows high flow of contrast media and allows downsizing of French size

  PROVEN PERFORMANCE

  • Superior torqueability for precise placement^1,a
  • Excellent trackability in tortuous anatomy while navigating the radial artery^1,a
  • Superior flow rates for diagnostic imaging^1,a

  _1.DOF
  ^{a. When compared to leading competitors} 

• 

  wishlist

  NC Sprinter PTCA BALLOON

  NC Sprinter RX Noncompliant

  NC Stormer over-the-wire noncompliant balloon dilatation catheter offers controlled compliance, high pressures, and comprehensive lengths.

  Balloon Dilatation Catheter

  OVERVIEW

  The NC Sprinter™ RX noncompliant coronary balloon combines:

  • Sprinter crossing technology
  • High-pressure capability and controlled expansion¹

  ORDERING INFORMATION

  BALLOON LENGTHS 6, 9, 12 MM

  Balloon Diameter (mm)	Balloon Length (mm)
  	6	9	12
  2.00	NCSP2006X	NCSP2009X	NCSP2012X
  2.25	NCSP22506X	—	NCSP22512X
  2.50	NCSP2506X	NCSP2509X	NCSP2512X
  2.75	NCSP27506X	NCSP27509X	NCSP27512X
  3.00	NCSP3006X	NCSP3009X	NCSP3012X
  3.25	NCSP32506X	NCSP32509X	NCSP32512X
  3.50	NCSP3506X	NCSP3509X	NCSP3512X
  3.75	NCSP37506X	NCSP37509X	NCSP37512X
  4.00	NCSP4006X	NCSP4009X	NCSP4012X
  4.50	—	—	—
  5.00	—	—	—

  BALLOON LENGTHS 15, 21, 27 MM

  Balloon Diameter (mm)	Balloon Length (mm)
  	15	21	27
  2.00	NCSP2015X	NCSP2021X	—
  2.25	—	NCSP22521X	—
  2.50	NCSP2515X	NCSP2521X	NCSP2527X
  2.75	NCSP27515X	NCSP27521X	—
  3.00	NCSP3015X	NCSP3021X	NCSP3027X
  3.25	NCSP32515X	NCSP32521X	—
  3.50	NCSP3515X	NCSP3521X	NCSP3527X
  3.75	NCSP37515X	NCSP37521X	—
  4.00	NCSP4015X	NCSP4021X	NCSP4027X
  4.50	NCSP4515X	NCSP4521X	—
  5.00	NCSP5015X	—	—

• 

  Rated 4.00 out of 5

  wishlist

  PTCA Balloon Ryurei

  Description

  Confidence in your hands

  Ryurei™ has superior crossability¹ thanks to the combination of low distal profiles and Terumo’s hydrophilic M coating. The short balloon bonding and reinforced shaft¹ results in enhanced trackability¹ while maintaining excellent pushability¹.

  These features can increase physician’s confidence in success even during complex procedures.

  Characteristics

  Excellent Pusability

  The combination of flexible distal part,  tapered core wire on the midshaft and the thick proximal hypotube, results in smooth and balanced transition across the entire catheter for high transmission force, resulting in excellent pushability

  Superior Crossability²

  Thanks to the combination of distal  low profiles and the Terumo hydrophilic M-Coat, Ryurei offers low friction in crossing tight lesions

  Enhanced Trackability²

  With an optimal tip design and improved balloon bonding, Ryurei provides enhanced trackability, even in tortuous anatomy and difficult to navigate vessels.

  

   

  General specifications

  ​Shaft diameter	​1.9 Fr/0.64 mm Proximal • 2.5 Fr/0.84 mm Middle • 2.4 Fr/0.79 mm to 2.7 Fr/0.89 mm (tapered) Distal (1.00 to 1.50 mm) • 2.6 Fr/0.87 mm Distal (2.00 to 4.00 mm)
  ​Usable length	​145 cm
  ​Balloon markers #	​1(Ø1.0 to Ø 1.5 mm) • 2(Ø2.0 to Ø4.0 mm)
  ​Nominal pressure	​6 atm / 608 kPa
  ​Rated burst pressure	Ø1.0 – 3.0 mm=14 atm(1419kPa) • Ø3.25 – 4.0 mm = 12 atm(1216 kPa)
  ​Guidewire compatibility	​Maximum diameter: 0.014″ / 0.36 mm
  ​Lesion entry profile	​0.41 mm (Ø1.00 to Ø1.50 mm) • 0.43 mm (Ø2.00 to Ø4.00 mm)
  ​Coating	​Hydrophilic

  Item specifications

  Balloon length / Product code​ ​ ​ ​ ​ ​ ​
  Balloon Diameter	5 mm	10 mm	15 mm	20 mm	30 mm	40 mm
  1.00 mm	DC-RR1005HH
  ​1.25 mm	​DC-RR1205HH	​​DC-RR1210HH	​​DC-RR1215HH	​​DC-RR1220HH	​	​
  1.50 mm	DC-RR1505HH	DC-RR1510HH	DC-RR1515HH	DC-RR1520HH
  2.00 mm		DC-RR2010HHW	DC-RR2015HHW	DC-RR2020HHW	DC-RR2030HHW	DC-RR2040HHW
  2.25 mm		DC-RR2210HHW	DC-RR2215HHW	DC-RR2220HHW
  2.50 mm		DC-RR2510HHW	DC-RR2515HHW	DC-RR2520HHW	DC-RR2530HHW	DC-RR2540HHW
  2.75 mm		DCRR2710HHW	DC-RR2715HHW	DC-RR2720HHW
  3.00 mm		DC-RR3010HHW	DC-RR3015HHW	DC-RR3020HHW	DC-RR3030HHW	DC-RR3040HHW
  3.25 mm		DC-RR3210HHW	DC-RR3215HHW	DC-RR3220HHW
  3.50 mm		DC-RR3510HHW	DC-RR3515HHW	DC-RR3520HHW	DC-RR3530HHW	DC-RR3540HHW
  3.75 mm		DC-RR3710HHW	DC-RR3715HHW	DC-RR3720HHW
  4.00 mm		DC-RR4010HHW	DC-RR4015HHW	DC-RR4020HHW

  References

  ¹ Ryurei φ1.00-5mm compared to Tazuna 1.25-10 mm- Data on file ISCD-416-31-4
  * For Ryurei Ø 1.00 mm – Ø 1.50 mm.
  ** For Ryurei Ø 1.00mm – 5mm ​

   

  ² Compared to Tazuna PTCA dilatation catheter