Related products

• 

  wishlist

  PTCA BALLOON NC TREK

  DES with most extensive clinical evidence with 50,000 patients enrolled worldwide. Facilitates early healing by abluminal gradient coating and reduced drug dose. Bifurcation Excellence. Flexible stent design. Advanced shaft technology. Reliable delivery in TRI.

  The safety and effectiveness of this PTCA balloon catheter for the treatment of in-stent restenosis (ISR) has not been established. Potential Adverse Events.

  The RX NC Takeru PTCA Balloon Dilatation Catheter is indicated for balloon dilatation of the stenotic portion in the coronary artery or bypass graft stenosis.

  47732 – Basic Coronary Angioplasty Balloon Catheter … MINI TREK RX Coronary Dilatation Catheters. Catalog Numbers. Balloon Length. 6mm 8mm 12mm 15mm.

  TECHNICAL INFORMATION

  NC TREK™ CORONARY DILATATION CATHETER
  NOMINAL PRESSURE (NP)	12 atm
  RATED BURST PRESSURE (RBP)	18 atm
  TIP ENTRY PROFILE	0.020 in average (3.00 mm Ø) 0.022 in maximum (1.50 mm – 3.25 mm Ø) 0.024 in maximum (3.50 mm – 5.00 mm Ø)
  CROSSING PROFILE	0.027 in average (3.00 mm Ø) 0.032 in maximum (1.50 – 3.50 mm Ø) 0.037 in maximum (3.75 – 5.00 mm Ø)
  RX NOTCH DIAMETER	2.6 French average (3.00 mm Ø) 2.9 French maximum
  TIP LENGTH	3.5 +/- 0.5 mm (2.00 – 3.25 mm Ø) 4.5 +/- 0.5 mm (3.50 – 4.50 mm Ø)
  BALLOON MATERIAL	Pebax‡, non-compliant
  MARKER MATERIAL	Flexible Tungsten/Pebax‡
  SHAFT LENGTH	143 cm
  COATING	Hydrophilic
  MAXIMUM GUIDE WIRE COMPATIBILITY	0.014 in
  LATEX FREE	Yes

  

  ORDERING INFORMATION

  Broad Size Matrix with 59 Sizes Available

  	BALLOON DIAMETER (MM)	BALLOON LENGTH (MM)
  		6	8	12	15	20	25
  NC TREK™ RX	1.50	1012444-06	1012444-08	1012444-12	1012444-15	1012444-20	–
  	2.00	1012445-06	1012445-08	1012445-12	1012445-15	1012445-20	–
  	2.25	1012446-06	1012446-08	1012446-12	1012446-15	1012446-20	–
  	2.50	1012447-06	1012447-08	1012447-12	1012447-15	1012447-20	1012447-25
  	2.75	1012448-06	1012448-08	1012448-12	1012448-15	1012448-20	–
  	3.00	1012449-06	1012449-08	1012449-12	1012449-15	1012449-20	1012449-25
  	3.25	1012450-06	1012450-08	1012450-12	1012450-15	1012450-20	–
  	3.50	1012451-06	1012451-08	1012451-12	1012451-15	1012451-20	1012451-25
  	3.75	–	1012452-08	1012452-12	1012452-15	1012452-20	–
  	4.00	–	1012453-08	1012453-12	1012453-15	1012453-20	–
  	4.50	–	1012454-08	1012454-12	1012454-15	1012454-20	–
  	5.00	–	1012455-08	1012455-12	1012455-15	1012455-20	–

  COMPLIANCE CHART

  INFLATION PRESSURE (ATM)	BALLOON DIAMETER (MM)
  	1.50	2.00	2.25	2.50	2.75	3.00	3.25	3.50	3.75	4.00	4.50	5.00
  2	1.36	1.75	1.97	2.11	2.34	2.52	2.74	2.99	3.21	3.35	3.76	4.25
  3	1.37	1.78	1.99	2.19	2.38	2.58	2.84	3.05	3.29	3.45	3.87	4.35
  4	1.38	1.81	2.02	2.22	2.43	2.63	2.89	3.11	3.35	3.52	3.93	4.43
  5	1.39	1.84	2.04	2.26	2.47	2.68	2.95	3.18	3.41	3.59	3.99	4.50
  6	1.41	1.87	2.09	2.30	2.51	2.73	3.01	3.23	3.47	3.65	4.06	4.58
  7	1.42	1.90	2.13	2.34	2.55	2.78	3.06	3.29	3.53	3.71	4.13	4.66
  8	1.43	1.93	2.16	2.38	2.58	2.83	3.10	3.34	3.59	3.77	4.20	4.73
  9	1.45	1.95	2.19	2.42	2.63	2.87	3.15	3.37	3.63	3.83	4.26	4.80
  10	1.46	1.98	2.22	2.45	2.66	2.91	3.16	3.42	3.67	3.87	4.32	4.86
  11	1.47	2.00	2.24	2.48	2.69	2.94	3.23	3.46	3.71	3.91	4.37	4.91
  12 NP	1.49	2.01	2.26	2.50	2.71	2.97	3.26	3.49	3.74	3.95	4.41	4.96
  13	1.50	2.03	2.28	2.53	2.73	3.00	3.28	3.51	3.77	3.98	4.45	5.00
  14	1.51	2.04	2.30	2.55	2.76	3.02	3.31	3.54	3.80	4.01	4.49	5.04
  15	1.52	2.06	2.32	2.57	2.78	3.04	3.34	3.57	3.82	4.04	4.53	5.08
  16	1.53	2.07	2.33	2.59	2.79	3.07	3.36	3.60	3.85	4.07	4.57	5.12
  17	1.53	2.09	2.35	2.62	2.82	3.09	3.39	3.62	3.88	4.10	4.60	5.16
  18 RBP	1.54	2.10	2.37	2.64	2.84	3.11	3.41	3.65	3.91	4.13	4.64	5.20
  19	1.55	2.12	2.39	2.67	2.86	3.14	3.44	3.68	3.93	4.16	4.68	5.24
  20	1.56	2.13	2.41	2.69	2.88	3.16	3.47	3.71	3.96	4.19	4.72	5.28
  21	1.57	2.15	2.42	2.72	2.90	3.18	3.50	3.75	–	4.22	4.76	5.33
  22	1.58	2.17	2.45	2.75	2.93	3.21	–	3.78	–	4.25	–	5.37

   

   

• 

  wishlist

  AVANTI®+ INTRODUCER SHEATH

  Product Description

   

  Sheath introducers (Cordis) central lines are large-bore catheters (6-8.5 Fr) commonly placed in the ED for rapid infusion of large volumes of crystalloid or colloid, insertion of transvenous pacemakers, and administration of medications that needing reliable central access.

   

  For use in arterial and venous procedures requiring percutaneous introduction of Intravascular devices.

  The Cordis AVANTI+ Introducer is the pioneer of catheter sheath introducer technology. Featuring a SLIX Valve, the AVANTI+ Introducer provides smooth transitions, monitoring capabilities and exceptional performance for your procedural success, as well as:

   

  • A hexacuspid design that provides a balance between catheter maneuverability and hemostasis.
  • A rotating suture collar that facilitates greater procedural flexibility. It stays in place better and allows more patient movement.
  • A kink-resistant cannula design integrating a soft, flexible inner layer with a stiffer outer layer for improved bendability and support. It is also less prone to kinking, cost-effective and reliable.
  • Atraumatic tip transitions for both the sheath and the vessel dilator are uniquely tapered and manicured. This results in smooth insertions and may help lessen damage upon entry.

   

  What size is a Cordis? A Cordis/AVANTI comes in many sizes. For the sake of rapid infusion, the sizes go from 8-11 french. There are two lengths of the large-bore cannula: 11cm and 23cm.

  Introducer sheaths are used when there is the need for a larger catheter, such as for rapid volume administration or for the insertion of a pulmonary artery catheter.

   

  The Correct Way to Pull a Sheath

  1. Take your index, middle and sometimes your ring finger, and place them slightly above the sheath to feel the patient’s pulse.
  2. Slowly remove the sheath in a sterile manner, holding occlusive pressure to avoid bleeding.

   

  Our product range includes a wide range of Avanti transradial kit, cordis vista brite tip guiding catheters, emerald guidewire 150cm, guiding catheter 5f xb 3.5lbt, femoral sheath and empira ptca balloons cordis.

  We are one of the leading Trader, Importer and Exporter of this highly commendable and diverse range of Aspiration Catheter, Transseptal Needle, Control Coronary Syringes, Introducer Sets etc.

• 

  wishlist

  PILOT 50 PTCA GUIDEWIRE

  Product Details

  Model Name/Number	Pilot 50
  Size	Extra-Large
  Material	PTCA
  Length	190cm ( 0.014inch)
  Application	Hospital

  • So as to uphold the standing we have built up, we are engrossed in presenting a broad compilation of Hi Torque Pilot 50 Guide Wire.
  • The HI-TORQUE PILOT 50 guide wires are polymer-tipped wires with a lubricious, hydrophilic coating.
  • These wires provide excellent distal access with superb torque transmission and variable tip stiffness.

  These sizes are also available-

  PTCA PILOT 150 J

  PTCA PILOT 150 ST

  PTCA PILOT 50 JTIP

  PTCA PILOT 50 ST

• 

  wishlist

  WHISPER MS PTCA GUIDEWIRE

  The HI-TORQUE WHISPER guide wire combines the great distal access of a polymer-covered wire with an innovative technological feature for control and performance. It maneuvers easily, even in complex anatomy, with a soft tip designed to promote safety.

  Many physicians still use Guide Wire M even after 30 years of the initial stage of TRI. Learn more about Terumo’s low invasive devices designed for Transracial Intervention. Thin-Wall Technology. TRI Pioneer. Cost-Effective Products. Pioneer in Radial Access.

  Coronary guide wires by Abbott addressing a wide variety coronary intervention needs with both workhorse and specialty guide wires.

  Our portfolio of Coronary Specialty Guide Wires offer solutions for challenging anatomy and lesions, with a range of … HI-TORQUE WHISPER™ MS Guide Wire

  Appropriately enough, it truly was a wire used as a guide. But the origin was from the French and Dutch, and their term for the tension wire they used to secure their structures.

  The key features to recognise when selecting a guidewire are: (1) tapered tip or not; (2) polymer cover or not; (3) stiffness; and (4) trackability. It is not uncommon to exchange one set of wires for another during a complex procedure, which is done usually through a microcatheter.

  WHISPER MS GUIDE WIRE 0.014″ X 190CM, STRAIGHT

  • Tip load: 1.0g
  • Radiopaque length: 3 cm
  • Outside diameter: 0.014″
  • Tip Outside diameter: 0.014″
  • Coating: Hydrophilic
  • Tip style: Core to tip
  • Polymer cover: Full Polymer Cover
  • Core Material: DURASTEEL Stainless Steel

  Guide wires are constructed with a central shaft of stainless steel or nitinol. The shaft tapers to a distal flexible tip spring coil made of platinum or tungsten (see Figure 3). Nitinol core wires are more resistant to kinking than stainless steel core wires but typically have less torque response.

  Coronary guide wires are specialized pieces of equipment used to deliver therapies to diseased areas of the coronary arterial system – the vascular pathways responsible for providing the heart muscle with oxygenated blood.

  Solid Core Wire: The central wire is encased by a metal ‘spring’ coil. Mandrel Wire: The outer spring coil is at one end. Ribbon Wire: The spring coil encases both the core wire and a ribbon wire.

  The guidewire is the device used to guide the catheter into place during CVC insertions. The purpose of a guidewire is to gain access to the blood vessels using a minimally invasive technique.