FX classix (FX60/FX80)

Homogeneous dialysate flow for better clearances

The pinnacle structure at both ends of the polypropylene housing together with the potting technology provides an even, radial flow of the dialysate around the individual fibers of the bundle
The undulation of the hollow fibers prevents dialysate channeling and, thus, enhances the performance of the dialyzer. The higher packing density of the fiber bundle together with the undulation of the hollow fibers enables a uniform dialysate flow within the whole cross-section of fiber bundle

Dialyzer weight is a crucial factor not only in logistics but also in waste management. The housing of FX-class dialyzers is made of polypropylene. In comparison to the widely used polycarbonate it is much lighter with the result that FX-class dialyzers weigh around half as much as most dialyzers.
FX 60 classix	107g
FX CorDiax 60	107g

No chemical residuals	No need for gamma sterilization – high energy ionizing radiation can degrade and alter the material chemistry.
Low rinsing volumes	Minimal preparation time – since dialyzers are clean on arrival, rinsing times prior to use are substantially reduced.
Lower costs	Lower rinsing volumes mean reduced preparation times and costs.

Purity enhanced — with steam

All FX-class dialyzers are sterilized by the unique INLINE steam sterilization process:

Both the blood and the dialysate compartment of the dialyzers are rinsed continuously with steam at a temperature of or above 121°C for more a minimum of 15 minutes. Rinsing with hot steam and without chemicals results in extremely low levels of residuals in the dialyzer
The dialyzer is rinsed with sterile water
Every dialyzer is tested for fiber integrity using a bubble-point test
The dialyzers are dried with warm, sterile air
Finally, after drying the blood inlet and outlet ports are closed

Benefits of the INLINE steam sterilization process

Highly pure, sterile and pyrogen-free dialyzers without any potentially harmful residuals from sterilization
Biocompatibility of membranes remains unaffected from sterilization
Optimized use of resources due to low rinsing volumes: Only 500 mL is required
Minimized risk of blood leakages and fiber ruptures due to 100% fiber integrity testing
Dry dialyzers with minimized risk of contamination due to microbial growth

Performance data

FX classix High-Flux dialysers		FX 50 classix	FX 60 classix	FX 80 classix	FX 100 classix
Clearance (Q_B = 300 mL/min)	Molecular weight (Dalton)
Cytochrome c	12,230	55	74	89	100
Inulin	5,200	72	95	113	122
Vitamin B₁₂	1,355	137	162	185	201
Phosphate	132	204	225	244	253
Creatinine	113	224	243	259	264
Urea	60	253	266	279	280
Clearance (Q_B = 400 mL/min)

Cytochrome c	12,230		76	92	105
Inulin	5,200		99	119	129
Vitamin B₁₂	1,355		175	202	222
Phosphate	132		252	279	291
Creatinine	113		277	300	309
Urea	60		312	334	336

Ultrafiltration coeff. (mL/h x mm Hg)		27	38	53	68

Sieving coefficients
Albumin	66,500	< 0.001
Myoglobin	17,053	0.1
β₂-microglobulin	11,731	0.7
Inulin	5,200	1
In vitro performance: Q_D = 500 mL/min, Q_F = 0 mL/min, T = 37°C (ISO8637). Ultrafiltration coefficients: human blood, Hct 32 %, protein content 6 %.
Membrane material	Helixone
Sterilisation method	INLINE steam
Housing material	Polypropylene
Potting compound	Polyurethane
Units per box	24

Effective surface (m^²)		1.0	1.4	1.8	2.2
K₀A Urea		866	1,068	1,394	1,429
Priming volume (mL)		53	74	95	116
Article number		F00002385	F00002386	F00002387	F00002388

Add to wishlist

Description
Reviews (0)

FX classix

Reviews

There are no reviews yet.

Be the first to review “FX classix (FX60/FX80)”

Category: products

Related products

Rated 1.00 out of 5

wishlist

Sprinter OTW Balloon
Sprinter OTW Semicompliant

Balloon Dilatation Catheter

Sprinter™ over-the-wire semicompliant balloon offers low-tip and crossing profiles with a comprehensive size matrix

OVERVIEW

The Sprinter™ over-the-wire (OTW) semicompliant balloon dilatation catheter is available in a broad size matrix.

FEATURES

MiniWrap folding is used on 1.50-4.00 balloons. The 1.50 mm balloon has two folds.

Selective Dura-Trac coating

2.5 mm tip

FasTrac tip

Balloon’s

Distal shaft

Gold-swaged marker bands

Selective Dura-Trac hydrophilic coating

Fulcrum balloon material

Proximal shaft (oval)

FasTrac tip

wishlist

EUPHORA SEMICOMPLIANT BALLOON CATHETER

Euphora™ semicompliant balloon

Balloon Dilatation Catheter

Euphora™ semicompliant balloon dilatation catheter complements your expertise and provides uncompromising performance in the moment you need it most.

OVERVIEW

Advancing Innovation through Partnership

To develop the Euphora™ low-profile semicompliant balloon dilatation catheter, we partnered with nearly 2,000 interventional cardiologists and cath lab professionals. The result is:

Superior deliverability¹
Superb Kissing Balloons Technique (KBT) performance²
The lowest crossing profile compared to leading competitors³

PRODUCT DETAILS

What Makes the Euphora Balloon an Excellent Choice?

ORDERING INFORMATION

BALLOON LENGTHS 6, 10, 12, AND 15 MM



1.50	EUP1506X	EUP1510X	EUP1512X	EUP1515X
2.00	EUP2006X	EUP2010X	EUP2012X	EUP2015X
2.25	EUP22506X	EUP22510X	EUP22512X	EUP22515X
2.50	EUP2506X	EUP2510X	EUP2512X	EUP2515X
2.75	EUP27506X	EUP27510X	EUP27512X	EUP27515X
3.00	EUP3006X	EUP3010X	EUP3012X	EUP3015X
3.25	EUP32506X	EUP32510X	EUP32512X	EUP32515X
3.50	EUP3506X	EUP3510X	EUP3512X	EUP3515X
3.75	EUP37506X	EUP37510X	EUP37512X	EUP37515X
4.00	EUP4006X	EUP4010X	EUP4012X	EUP4015X

BALLOON LENGTHS 20, 25, AND 30 MM



1.50	EUP1520X	—	—
2.00	EUP2020X	EUP2025X	EUP2030X
2.25	EUP22520X	EUP22525X	—
2.50	EUP2520X	EUP2525X	EUP2530X
2.75	EUP27520X	EUP27525X	—
3.00	EUP3020X	EUP3025X	EUP3030X
3.25	EUP32520X	EUP32525X	—
3.50	EUP3520X	EUP3525X	EUP3530X
3.75	EUP37520X	EUP37525X	—
4.00	EUP4020X	EUP4025X	EUP4030X

wishlist

NC EUPHORA NONCOMPLIANT BALLOON CATHETER

NC Euphora™ noncompliant balloon

NC Euphora™ noncompliant balloon dilatation catheter combines Euphora technology with controlled, high-pressure performance.

Balloon Dilatation Catheter

OVERVIEW

From Collaboration to Innovation

When it comes to controlled, high-pressure performance, the NC Euphora™ noncompliant balloon dilatation catheter has what you’re looking for:

High RBP up to 20 atm
Low-growth profile¹
Superior deliverability¹

In fact, we worked with nearly 2,000 interventional cardiologists and cath lab professionals to develop it — so you can choose it with confidence for your patients.

PRODUCT DETAILS

Looking for NC Euphora Noncompliant Performance?

ORDERING INFORMATION

BALLOON LENGTHS 6, 8, AND 12 MM

Balloon Diameter (mm)	Balloon Length (mm)
Balloon Diameter (mm)	6	8	12
2.00	NCEUP2006X	NCEUP2008X	NCEUP2012X
2.25	NCEUP22506X	NCEUP22508X	NCEUP22512X
2.50	NCEUP2506X	NCEUP2508X	NCEUP2512X
2.75	NCEUP27506X	NCEUP27508X	NCEUP27512X
3.00	NCEUP3006X	NCEUP3008X	NCEUP3012X
3.25	NCEUP32506X	NCEUP32508X	NCEUP32512X
3.50	NCEUP3506X	NCEUP3508X	NCEUP3512X
3.75	NCEUP37506X	NCEUP37508X	NCEUP37512X
4.00	NCEUP4006X	NCEUP4008X	NCEUP4012X
4.50	—	NCEUP4508X	NCEUP4512X
5.00	—	NCEUP5008X	NCEUP5012X

BALLOON LENGTHS 15, 20, AND 27 MM

Balloon Diameter (mm)	Balloon Length (mm)
Balloon Diameter (mm)	15	20	27
2.00	NCEUP2015X	NCEUP2020X	—
2.25	NCEUP22515X	NCEUP22520X	—
2.50	NCEUP2515X	NCEUP2520X	NCEUP2527X
2.75	NCEUP27515X	NCEUP27520X	NCEUP27527X
3.00	NCEUP3015X	NCEUP3020X	NCEUP3027X
3.25	NCEUP32515X	NCEUP32520X	NCEUP32527X
3.50	NCEUP3515X	NCEUP3520X	NCEUP3527X
3.75	NCEUP37515X	NCEUP37520X	NCEUP37527X
4.00	NCEUP4015X	NCEUP4020X	NCEUP4027X
4.50	NCEUP4515X	NCEUP4520X	—
5.00	NCEUP5015X	—	—

wishlist

Coronary Diagnostic Catheter (OPTITORQUE)

PRODUCT OVERVIEW

A complete line of coronary diagnostic catheters designed for superior torque control and precise placement.

RADIAL-SPECIFIC UNIVERSAL SHAPES

Radial Specific curves designed to enable support and alignment during catheterization¹
Excellent back-up support for angiography of both RCA and LCA with a single catheter^1,a
Universal design eliminates the need for catheter exchanges and potentially shortens procedural and fluoroscopic time

_{1. DOF Reference}^{a. when compared to leading competitors

2. Ikaria article.}

OPTITORQUE Classic Shapes

Shape Category	Product Code 5 Fr / 1.70 mm	Product Code 6 Fr / 2.00 mm	Shape Name (cm)	Length Holes	Side Tip	Shape
Pigtail	40-5030	40-6030	Straight Pigtail	110	6
Pigtail	40-5031	40-6031	Angled Pigtail 155°	110	6
Judkins Left	40-5040	40-6040	JL 3.5 (Judkins Left 3.5 cm)	100
	40-5041	40-6041	JL 4.0 (Judkins Left 4.0 cm)	100
	40-5042	40-6042	JL 5.0 (Judkins Left 5.0 cm)	100
Judkins Right	40-5043	40-6043	JR 3.5 (Judkins Right 3.5 cm)	100
	40-5044	40-6044	JR 4.0 (Judkins Right 4.0 cm)	100
	40-5045		JR 5.0 (Judkins Right 5.0 cm)	100
Bypass	40-5050	40-6050	Internal Mammary	100
Amplatz	40-5060		AL 1 (Amplatz Left Small Type)	100
Amplatz	40-5061	40-6061	AL 2 (Amplatz Left Middle Type)	100

UNIQUE DESIGN

Designed for coaxial alignment to the ostium, allowing the catheter to sit at the appropriate angle for optimal engagement
Large lumen allows high flow of contrast media and allows downsizing of French size

PROVEN PERFORMANCE

Superior torqueability for precise placement^1,a
Excellent trackability in tortuous anatomy while navigating the radial artery^1,a
Superior flow rates for diagnostic imaging^1,a

_1.DOF^{a. When compared to leading competitors}

Cart

FX classix (FX60/FX80)

Proven Fresenius quality for standard

hemodialysis

Key features

Optimized blood flow conditions

Homogeneous dialysate flow for better clearances

Dialyzer weight

The benefits of INLINE steam sterilization