Related products

• 

  wishlist

  RADIFOCUS REDIAL SHEATH

  Providing you the best range of Terumo Radifocus Radial Introducer Sheath and Cordis Femoral Introducer Sheath with effective & timely delivery.

  The radial artery access sheath is used to gain arterial access and facilitate the insertion of catheters or other equipment for diagnostic and vascular interventions.

  • The Cordis AVANTI®+ Introducer is the pioneer of catheter sheath introducer technology. Featuring a patented SLIX Valve, the AVANTI®+ introducer provides smooth transitions, monitoring capabilities and exceptional performance for your procedural success, as well as
  • A hexacuspid design that provides a balance between catheter maneuverability and hemostasis.
  • A rotating suture collar that facilitates procedural flexibility. It stays in place and allows patient movement.
  • A kink-resistant cannula design integrating a soft, flexible inner layer with a stiffer outer layer designed to increase bendability and support, and decrease kinking.
  • Atraumatic tip transitions for both the sheath and the vessel dilator are uniquely tapered and manicured. This results in smooth insertions and helps to minimize damage upon entry.

  As part of the circulatory system, the radial artery supplies blood from the heart to the forearm.

  Radial sheaths had the smallest OD (1 Fr smaller) when compared to similar sized conventional sheaths. For instance, the OD of 4 Fr radial sheath (1.610 ± 0.006 mm) is essentially the same as the OD of the conventional 3 Fr (1.644 ± 0.016 mm) and 3.3 Fr (1.635 ± 0.005 mm) sheaths.

• 

  wishlist

  Launcher- 8f Guiding Catheter’s

  EBU@ (Extra Backup)

  LA8EBU30 (EBU 3.0)

  LA8EBU35 (EBU 3.5)

  LA8EBU375 (EBU 3.75)

  LA8EBU40 (EBU 4.0)

  LA8EBU45 (EBU 4.5)

  LA8EBU50 (EBU 5.0)

  JL@ (Judkin Left )

  LA8JL30 (JL 3.0)

  LA8JL35 (JL 3.5)

  LA8JL40 (JL 4.0)

  LA8JL45 (JL 4.5)

  LA8JL50 (JL 5.0)

  LA8JL60 (JL 6.0)

  JR@ (Judkin Right )

  LA8JR30 (JR 3.0)

  LA8JR35 (JR 3.5)

  LA8JR40 (JR 4.0)

  LA8JR45 (JR 4.5)

  LA8JR50 (JR 5.0)

  LA8JR60 (JR 6.0)

  AL@ (Amplatz Left )

  LA8AL75 (AL .75)

  LA8AL10 (AL 1.0)

  LA8AL15 (AL 1.5)

  LA8AL20 (AL 2.0)

  LA8AL25 (AL 2.5)

  LA8AL30 (AL 3.0)

  LA8AL40 (AL 4.0)

  SAL@ (Short Amplatz Left)

  LA8SAL75 (SAL . 75)

  LA8SAL10 (SAL 1.0)

  LA8SAL15 (SAL 1.5)

  LA8SAL20 (SAL 2.0)

  LA8SAL25 (SAL 2.5)

  LA8SAL30 (SAL 3.0)

  LA8SAL40 (SAL 4.0)

  AR@ (Amplatz Right)

  LA8AR10 (AR 1.0)

  LA8AR20 (AR 2.0)

  LA8ALR12 (ALR 1.2)

  ECR Curves@ (Backup Support Right)

  LA8ECR35 (ECR 3.5)

  LA8ECR40 (ECR 4.0)

  LA8ECR45 (ECR 4.5)

  LA8RBU35 (RBU 3.5)

  LA8RBU40 (RBU 4.0)

  SCR@ (Shepherd’s Crook Right)

  LA8SCR35 (SCR 3.5)

  LA8SCR40 (SCR 4.0)

  LA8SCR50 (SCR 5.0)

  SAR@ (Short Amplatz Right)

  LA8SAR10 (SAR 1.0)

  LA8SAR20 (SAR 2.0)

  Multipurpose@

  LA8MB1 (MB 1)

  LA8MB2 (MB 2)

  LA8HSREL (Hockey Stick)

  LA8HSI (Hockey I)

  LA8HSII (Hockey II)

  LA8HSIII (Hockey III)

  Bypass Crafts@

  LA8LCB (LCB)

  LA8RCB (RCB)

  LA8RCB (RCB III)

  LA8RCB (RCB  90cm)

  LA8IMA (IMA)

  LA8IMA (IMA  90cm)

• 

  wishlist

  EXPORT ADVANCE ASPIRATION CATHETER

  EXPORT ADVANCE ASPIRATION CATHETER

  Export Advance

  Aspiration Catheter

  ADVANCING PERFORMANCE

  The Export Advance™ aspiration catheter delivers consistent, high-performing aspiration power when it matters most — restoring flow and protecting patients.

  PRODUCT DETAILS^†

  Superior Deliverability¹

  Full-Wall Technology provides variable levels of stiffness without joints, for optimal kink resistance and catheter performance.

  Dependable Delivery to the Target Site:

  • Preloaded stylet enhances shaft stiffness during catheter delivery, boosting kink resistance, trackability, and pushability²
  • Buddy wire compatibility allows for extra support, when needed.^†

  High-performing Aspiration Power:

  • Large extraction lumen (0.044″ proximal; 0.043″ distal) increases aspiration power.^‡
  • Optimised hub geometry improves flow.^‡
  • Soft, short, forward-facing tip design permits excellent particle capture.^†

  ---

  ORDERING INFORMATION

  Product Code	Guide Compatibility	Wire Compatibility (in)	Length (cm)
  ADVANCE	6 F min. guide I.D. 0.070″	0.014	140

  • ™Third-party brands are trademarks of their respective owners. All other brands are trademarks of a Medtronic company.

  • Based on bench test data, 2013. Bench test data may not be indicative of clinical performance.
  • Based on bench test data vs. Export™ AP catheter.

  ---

  • Bench testing vs. Terumo Eliminate™* and Eliminate™* 3 aspiration catheters, Vascular Solutions Pronto^®* LP, Pronto^®* V3 and Pronto^®* V4 aspiration catheters, Merit^®* ASAP aspiration catheter, Kaneka Thrombuster III GR* aspiration catheter, Spectranetics QuickCat™* aspiration catheter, IHT Polska Hunter^®* aspiration catheter, Medrad Possis™* Fetch™* 2 aspiration catheter, and Hexacath Recover* aspiration catheter. 10093906DOC, 2013. Bench test data may not be indicative of clinical performance.
  • Based on animal studies compared with Export™ AP aspiration catheter without stylet.
• 

  Rated 4.00 out of 5

  wishlist

  PTCA Balloon Ryurei

  Description

  Confidence in your hands

  Ryurei™ has superior crossability¹ thanks to the combination of low distal profiles and Terumo’s hydrophilic M coating. The short balloon bonding and reinforced shaft¹ results in enhanced trackability¹ while maintaining excellent pushability¹.

  These features can increase physician’s confidence in success even during complex procedures.

  Characteristics

  Excellent Pusability

  The combination of flexible distal part,  tapered core wire on the midshaft and the thick proximal hypotube, results in smooth and balanced transition across the entire catheter for high transmission force, resulting in excellent pushability

  Superior Crossability²

  Thanks to the combination of distal  low profiles and the Terumo hydrophilic M-Coat, Ryurei offers low friction in crossing tight lesions

  Enhanced Trackability²

  With an optimal tip design and improved balloon bonding, Ryurei provides enhanced trackability, even in tortuous anatomy and difficult to navigate vessels.

  

   

  General specifications

  ​Shaft diameter	​1.9 Fr/0.64 mm Proximal • 2.5 Fr/0.84 mm Middle • 2.4 Fr/0.79 mm to 2.7 Fr/0.89 mm (tapered) Distal (1.00 to 1.50 mm) • 2.6 Fr/0.87 mm Distal (2.00 to 4.00 mm)
  ​Usable length	​145 cm
  ​Balloon markers #	​1(Ø1.0 to Ø 1.5 mm) • 2(Ø2.0 to Ø4.0 mm)
  ​Nominal pressure	​6 atm / 608 kPa
  ​Rated burst pressure	Ø1.0 – 3.0 mm=14 atm(1419kPa) • Ø3.25 – 4.0 mm = 12 atm(1216 kPa)
  ​Guidewire compatibility	​Maximum diameter: 0.014″ / 0.36 mm
  ​Lesion entry profile	​0.41 mm (Ø1.00 to Ø1.50 mm) • 0.43 mm (Ø2.00 to Ø4.00 mm)
  ​Coating	​Hydrophilic

  Item specifications

  Balloon length / Product code​ ​ ​ ​ ​ ​ ​
  Balloon Diameter	5 mm	10 mm	15 mm	20 mm	30 mm	40 mm
  1.00 mm	DC-RR1005HH
  ​1.25 mm	​DC-RR1205HH	​​DC-RR1210HH	​​DC-RR1215HH	​​DC-RR1220HH	​	​
  1.50 mm	DC-RR1505HH	DC-RR1510HH	DC-RR1515HH	DC-RR1520HH
  2.00 mm		DC-RR2010HHW	DC-RR2015HHW	DC-RR2020HHW	DC-RR2030HHW	DC-RR2040HHW
  2.25 mm		DC-RR2210HHW	DC-RR2215HHW	DC-RR2220HHW
  2.50 mm		DC-RR2510HHW	DC-RR2515HHW	DC-RR2520HHW	DC-RR2530HHW	DC-RR2540HHW
  2.75 mm		DCRR2710HHW	DC-RR2715HHW	DC-RR2720HHW
  3.00 mm		DC-RR3010HHW	DC-RR3015HHW	DC-RR3020HHW	DC-RR3030HHW	DC-RR3040HHW
  3.25 mm		DC-RR3210HHW	DC-RR3215HHW	DC-RR3220HHW
  3.50 mm		DC-RR3510HHW	DC-RR3515HHW	DC-RR3520HHW	DC-RR3530HHW	DC-RR3540HHW
  3.75 mm		DC-RR3710HHW	DC-RR3715HHW	DC-RR3720HHW
  4.00 mm		DC-RR4010HHW	DC-RR4015HHW	DC-RR4020HHW

  References

  ¹ Ryurei φ1.00-5mm compared to Tazuna 1.25-10 mm- Data on file ISCD-416-31-4
  * For Ryurei Ø 1.00 mm – Ø 1.50 mm.
  ** For Ryurei Ø 1.00mm – 5mm ​

   

  ² Compared to Tazuna PTCA dilatation catheter