CALL : 8447755671 , 77019 18238
My Favourite Wishlist

Cart

Your Cart is Empty

Back To Shop
Payment Details
Sub Total ₹0.00

View cartCheckout

Category

CO PILOT
CO PILOT - Image 2
CO PILOT - Image 3
CO PILOT - Image 4
CO PILOT - Image 5

CO PILOT

(3 customer reviews)

CO PILOT GUIDE WIRE 

Abbott 1003330 Guide Wire Accessory Kit with .096″Copilot Bleedback Control valve, torque device, insertion tool. Box of 25 

Maintains a fluid-tight seal around a diagnostic/
interventional device with
a maximum OD of .096 inches while allowing
catheter movement during angioplasty
procedures.
• COPILOT™ Bleedback Control Valve has two
seals that operate independently
– The clamp seal can be opened or closed
by rotating the cap. Closing the clamp seal
allows for high pressure injections (up to
400 psi) and also secures the diagnostic/
interventional device position within the
vasculature.
– The Bleedback Control (BBC) seal is a
diaphragm seal that forms around diagnostic/
interventional devices as they move into and
out of the vasculature. This seal provides
minimal fluid loss without restricting device
movement. The BBC seal is open when the
cap is pressed down, and closed when the cap
is released (no rotating required). An open
BBC seal allows air to be purged from the
device and allows the insertion/withdrawal
of diagnostic/interventional devices.

  • Each kit contains 1 each of a Guide Wire Introducer, a Hemostatic Valve and a Guide Wire Torque Device.

Add to wishlist

3 reviews for CO PILOT

  1. https://bandur-Art.Blogspot.com/2024/08/the-ultimate-guide-to-no-mans-sky-mods.html –

    Do yoou min if I qiote a couple of your articles as long as I provide
    credit and sources back to your webpage? My blog site is in the exact same arfea of interest as yours andd
    my visitors would definitely benefit from soime of the information you
    provide here. Please let me know if this okay with
    you. Thanks a lot! https://bandur-Art.Blogspot.com/2024/08/the-ultimate-guide-to-no-mans-sky-mods.html

  2. Quiernera –

    After induction and transient transfection with plasmids encoding the remaining components necessary for producing complete vector particles, titers from all lines significantly exceeded 10 7 TU mL Figure 2 where to buy priligy Fourteen percent of the patients had not received prior chemotherapy; 27 had received chemotherapy in the adjuvant setting, 40 in the metastatic setting and 19 in both metastatic and adjuvant settings

  3. Quiernera –

    [url=https://fastpriligy.top/]priligy where to buy[/url] The association between depression, antidepressant therapy, and adherence to endocrine therapy is complex, and several aspects need further investigation

Add a review

Your email address will not be published. Required fields are marked *

Category:

Related products

  • wishlist

    FINECROSS Microcatheter

    FINECROSS® MG Coronary Micro-Guide Catheter

    Product Code Catheter Length Distal Hydrophilic Coating Distal Outer Diameter Proximal Outer Diameter Distal Inner Diameter Proximal Inner Diameter Recommended Guidewire Size
    35-1430 130cm 70cm 1.8Fr. (0.60mm) 2.6 Fr. (0.87mm) 0.018″ (0.45mm) 0.021″ (0.55mm) 0.014″ (0.36mm)
    35-1450 150cm 90cm 1.8Fr. (0.60mm) 2.6 Fr. (0.87mm) 0.018″ (0.45mm) 0.021″ (0.55mm) 0.014″ (0.36mm)

    PRODUCT OVERVIEW

    Coronary microguide catheter for integration of optimal guidewire support, superior trackability and crossability.1,2

    TAPERED STAINLESS STEEL BRAID CONSTRUCTION FOR OPTIMAL GUIDEWIRE SUPPORT

    FINECROSS MG stainless steel braid construction is designed to provide strength, responsiveness and support for improved pushability to access and cross complex lesions.

    13cm FLOPPY DISTAL SEGMENT FOR SUPERIOR TRACKABILITY1

    The distal 13 cm is ultra flexible for improved trackability around tight bends and tortuous anatomy.The floppy distal segment is designed to be atraumatic and provide an optimal balance between trackability and safety while navigating through the tortuous anatomy.1

    TAPERED OUTER DIAMETER FOR SUPERIOR CROSSABILITY1,2

    The outer diameter of the stainless steel shaft tapers from a proximal 2.6Fr. to a distal 1.8Fr. designed for improved crossability and guidewire handling.1,2

    DOCUMENTS

  • wishlist

    PTCA Balloon Ryurei

    Description

    Confidence in your hands

    Ryureiâ„¢ has superior crossability1 thanks to the combination of low distal profiles and Terumo’s hydrophilic M coating. The short balloon bonding and reinforced shaft1 results in enhanced trackability1 while maintaining excellent pushability1.

    These features can increase physician’s confidence in success even during complex procedures.

    Characteristics

    Excellent Pusability

    The combination of flexible distal part,  tapered core wire on the midshaft and the thick proximal hypotube, results in smooth and balanced transition across the entire catheter for high transmission force, resulting in excellent pushability

    Superior Crossability2

    Thanks to the combination of distal  low profiles and the Terumo hydrophilic M-Coat, Ryurei offers low friction in crossing tight lesions

    Enhanced Trackability2

    With an optimal tip design and improved balloon bonding, Ryurei provides enhanced trackability, even in tortuous anatomy and difficult to navigate vessels.

     

    General specifications

    ​Shaft diameter ​1.9 Fr/0.64 mm Proximal • 2.5 Fr/0.84 mm Middle • 2.4 Fr/0.79 mm to 2.7 Fr/0.89 mm (tapered) Distal (1.00 to 1.50 mm) • 2.6 Fr/0.87 mm Distal (2.00 to 4.00 mm)
    ​Usable length ​145 cm
    ​Balloon markers # ​1(Ø1.0 to Ø 1.5 mm) • 2(Ø2.0 to Ø4.0 mm)
    ​Nominal pressure ​6 atm / 608 kPa
    ​Rated burst pressure Ø1.0 – 3.0 mm=14 atm(1419kPa) • Ø3.25 – 4.0 mm = 12 atm(1216 kPa)
    ​Guidewire compatibility ​Maximum diameter: 0.014″ / 0.36 mm
    ​Lesion entry profile ​0.41 mm (Ø1.00 to Ø1.50 mm) • 0.43 mm (Ø2.00 to Ø4.00 mm)
    ​Coating ​Hydrophilic

    Item specifications

    Balloon length / Product code​

    ​ ​ ​ ​ ​ ​
    Balloon Diameter 5 mm 10 mm 15 mm 20 mm 30 mm 40 mm
    1.00 mm DC-RR1005HH
    ​1.25 mm ​DC-RR1205HH ​​DC-RR1210HH ​​DC-RR1215HH ​​DC-RR1220HH ​ ​
    1.50 mm DC-RR1505HH DC-RR1510HH DC-RR1515HH DC-RR1520HH
    2.00 mm DC-RR2010HHW DC-RR2015HHW DC-RR2020HHW DC-RR2030HHW DC-RR2040HHW
    2.25 mm DC-RR2210HHW DC-RR2215HHW DC-RR2220HHW
    2.50 mm DC-RR2510HHW DC-RR2515HHW DC-RR2520HHW DC-RR2530HHW DC-RR2540HHW
    2.75 mm DCRR2710HHW DC-RR2715HHW DC-RR2720HHW
    3.00 mm DC-RR3010HHW DC-RR3015HHW DC-RR3020HHW DC-RR3030HHW DC-RR3040HHW
    3.25 mm DC-RR3210HHW DC-RR3215HHW DC-RR3220HHW
    3.50 mm DC-RR3510HHW DC-RR3515HHW DC-RR3520HHW DC-RR3530HHW DC-RR3540HHW
    3.75 mm DC-RR3710HHW DC-RR3715HHW DC-RR3720HHW
    4.00 mm DC-RR4010HHW DC-RR4015HHW DC-RR4020HHW

    References

    1 Ryurei φ1.00-5mm compared to Tazuna 1.25-10 mm- Data on file ISCD-416-31-4
    * For Ryurei Ø 1.00 mm – Ø 1.50 mm.
    ** For Ryurei Ø 1.00mm – 5mm ​

     

    2 Compared to Tazuna PTCA dilatation catheter

  • wishlist

    PTCA BALLOON ACCUFORCE

    Description

    Force. Success. No Compromise.

    The great balance between high pressure and high resistance, accurate dilatation and advanced deliverability. Accuforce is the latest generation of non-compliant PTCA balloons.

    Characteristics

    • ​Provides impressive high-pressure resistance up to 22 atm
    • Optimizes (re)crossability and deliverability1
    • Operates accurately in pre- and post-dilatation

    General specifications

    Shaft diameter 1.9 Fr / 0.64 mm Proximal
    2.5 Fr / 0.84 mm Mid
    2.6 Fr / 0.86 mm Distal
    Usable length 145 cm
    Balloon markers 2
    Nominal pressure 12 atm / 1216 kPa
    Rated burst pressure 22 atm / 2229 kPa (2.0 mm to 4.0 mm)
    20 atm / 2026 kPa (4.5 and 5.0 mm)
    Guidewire compatibility Maximum diameter 0.014″ / 0.36 mm
    Lesion entry profile 0.43 mm
    Coating Hydrophilic

    Item specifications

    Ordering Information

    Balloon
    diameter
    (mm) ​    		 Balloon length (mm) / Item references  ​ ​ ​ ​ ​ ​
    6 8 12 15 20 25 30
    2.00 DC-RM2006HSW DC-RM2008HSW DC-RM2012HHW DC-RM2015HHW DC-RM2020HHW — —
    2.25 DC-RM2206HSW DC-RM2208HSW DC-RM2212HHW DC-RM2215HHW DC-RM2220HHW — —
    2.50 DC-RM2506HSW DC-RM2508HSW DC-RM2512HHW DC-RM2515HHW DC-RM2520HHW DC-RM2525HHW DC-RM2530HHW
    2.75 DC-RM2706HSW DC-RM2708HSW DC-RM2712HHW DC-RM2715HHW DC-RM2720HHW — —
    3.00 DC-RM3006HSW DC-RM3008HSW DC-RM3012HHW DC-RM3015HHW DC-RM3020HHW DC-RM3025HHW DC-RM3030HHW
    3.25 DC-RM3206HSW DC-RM3208HSW DC-RM3212HHW DC-RM3215HHW DC-RM3220HHW — —
    3.50 DC-RM3506HSW DC-RM3508HSW DC-RM3512HHW DC-RM3515HHW DC-RM3520HHW DC-RM3525HHW DC-RM3530HHW
    3.75 DC-RM3706HSW DC-RM3708HSW DC-RM3712HHW DC-RM3715HHW DC-RM3720HHW — —
    4.00 DC-RM4006HSW DC-RM4008HSW DC-RM4012HHW DC-RM4015HHW DC-RM4020HHW — —
    4.50 DC-RM4506HSW DC-RM4508HSW DC-RM4512HSW DC-RM4515HSW — — —
    5.00 DC-RM5006HSW DC-RM5008HSW DC-RM5012HSW DC-RM5015HSW — — —
    Enlarge table

    Please quote above item reference codes when placing an order.

    Balloon Compliance

    Balloon
    diameter
    (mm) ​    		 Pressure (atm) ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​ ​
    3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
    2.00 1.58 1.65 1.72 1.79 1.84 1.88 1.92 1.95 1.98 2.00* 2.01 2.03 2.04 2.05 2.06 2.08 2.09 2.10 2.12 2.13** 2.14 2.15 2.17
    2.25 1.96 2.01 2.06 2.11 2.14 2.16 2.19 2.21 2.23 2.25* 2.26 2.28 2.29 2.31 2.32 2.34 2.35 2.36 2.38 2.39** 2.41 2.42 2.44
    2.50 2.19 2.24 2.30 2.36 2.38 2.41 2.44 2.46 2.48 2.50* 2.52 2.53 2.55 2.56 2.58 2.60 2.61 2.63 2.64 2.66** 2.68 2.69 2.71
    2.75 2.43 2.48 2.53 2.59 2.62 2.65 2.67 2.70 2.73 2.75* 2.77 2.79 2.80 2.82 2.84 2.86 2.87 2.89 2.91 2.93** 2.94 2.96 2.98
    3.00 2.65 2.71 2.76 2.82 2.85 2.89 2.92 2.95 2.97 3.00* 3.02 3.04 3.06 3.08 3.10 3.11 3.13 3.15 3.17 3.19** 3.21 3.23 3.25
    3.25 2.89 2.95 3.01 3.07 3.10 3.14 3.17 3.20 3.22 3.25* 3.27 3.29 3.31 3.33 3.35 3.37 3.39 3.42 3.44 3.46** 3.47 3.48 3.51
    3.50 3.13 3.19 3.26 3.32 3.35 3.39 3.42 3.45 3.47 3.50* 3.52 3.54 3.57 3.59 3.61 3.63 3.65 3.68 3.70 3.72** 3.74 3.74 3.76
    3.75 3.37 3.44 3.50 3.56 3.60 3.63 3.66 3.69 3.72 3.75* 3.77 3.80 3.82 3.84 3.86 3.88 3.90 3.92 3.94 3.96** 3.98 3.99 4.01
    4.00 3.58 3.65 3.72 3.79 3.83 3.87 3.90 3.94 3.97 4.00* 4.03 4.05 4.07 4.09 4.11 4.13 4.15 4.17 4.19 4.21** 4.23 4.26 4.28
    4.50 4.02 4.10 4.19 4.28 4.32 4.37 4.40 4.44 4.47 4.50* 4.53 4.56 4.59 4.63 4.66 4.68 4.71 4.75** 4.78 4.81 4.84 4.87 4.91
    5.00 4.52 4.59 4.67 4.75 4.80 4.85 4.89 4.93 4.96 5.00* 5.03 5.07 5.10 5.13 5.16 5.19 5.22 5.26** 5.29 5.32 5.35 5.38 5.41
    Enlarge table
    * Nominal pressure
    ** Rated burst pressure

    References

    ​​1 Compared with Hiryu. Non-Compliant PTCA Balloon Catheter manufactured by Terumo Corporation.

    Ordering Information. Balloon diameter (mm) ​, Balloon length (mm) / Item references ​ ​ ​ ​ ​ ​.
    Balloon markers: 2
    Usable length: 145 cm
    Coating: Hydrophilic
    Lesion entry profile: 0.43 mm
    Straight-Single Latex Plastic Terumo Accuforce Balloon Catheter, Size: Medium ; Application, Hospital ; Brand, Terumo ; Material, Latex ; Inner Diameter, 36mm.
  • wishlist

    NC Sprinter PTCA BALLOON

    NC Sprinter RX Noncompliant

    NC Stormer over-the-wire noncompliant balloon dilatation catheter offers controlled compliance, high pressures, and comprehensive lengths.

    Balloon Dilatation Catheter

    OVERVIEW

    The NC Sprinterâ„¢ RX noncompliant coronary balloon combines:

    • Sprinter crossing technology
    • High-pressure capability and controlled expansion1

    ORDERING INFORMATION

    BALLOON LENGTHS 6, 9, 12 MM

    Balloon

    Diameter (mm)

    		 Balloon Length (mm)     
    6 9 12
    2.00 NCSP2006X NCSP2009X NCSP2012X
    2.25 NCSP22506X — NCSP22512X
    2.50 NCSP2506X NCSP2509X NCSP2512X
    2.75 NCSP27506X NCSP27509X NCSP27512X
    3.00 NCSP3006X NCSP3009X NCSP3012X
    3.25 NCSP32506X NCSP32509X NCSP32512X
    3.50 NCSP3506X NCSP3509X NCSP3512X
    3.75 NCSP37506X NCSP37509X NCSP37512X
    4.00 NCSP4006X NCSP4009X NCSP4012X
    4.50 — — —
    5.00 — — —

    BALLOON LENGTHS 15, 21, 27 MM

    Balloon

    Diameter (mm)

    		 Balloon Length (mm)     
    15 21 27
    2.00 NCSP2015X NCSP2021X —
    2.25 — NCSP22521X —
    2.50 NCSP2515X NCSP2521X NCSP2527X
    2.75 NCSP27515X NCSP27521X —
    3.00 NCSP3015X NCSP3021X NCSP3027X
    3.25 NCSP32515X NCSP32521X —
    3.50 NCSP3515X NCSP3521X NCSP3527X
    3.75 NCSP37515X NCSP37521X —
    4.00 NCSP4015X NCSP4021X NCSP4027X
    4.50 NCSP4515X NCSP4521X —
    5.00 NCSP5015X — —

Cart

Your Cart is Empty

Back To Shop
Payment Details
Sub Total ₹0.00

View cartCheckout