Related products

• 

  wishlist

  RESOLUTE INTEGRITY STENT

  Resolute Onyx DES

  for coronary artery disease

  Resolute Onyx™ is a drug-eluting stent (DES) that’s different by design, optimised for complex PCI, and proven safe and effective in real-world, high bleeding risk patients on 1-month dual antiplatelet therapy (DAPT).¹

  Resolute Onyx DES is different by design to address your DES needs and a wide range of patient anatomies. It features:

   

  • Best-in-class deliver ability
  • Enhanced visibility with thinner struts
  • Smooth side branch access
  • Fast healing
  • The broadest diameter range

  Best-in-class deliverability

  Single-wire design

  Resolute Onyx DES is made from a single wire, which gives it a fluid range of motion and provides the flexibility needed for best-in-class deliverability.²

  

  Sinusoid-formed wire

  

  Helical wrap

  

  Laser-fused

  Competitive comparison

  Resolute Onyx DES is more deliverable than laser-cut SYNERGY™* XD and XIENCE Skypoint™*, which are stiffer.

   

  Deliverability comparison — 3.0 mm DES²

  (Lower is better)

  

  Enhanced visibility with thinner struts

  Platinum-iridium core within Resolute Onyx DES increases visibility for accurate stent placement without compromising strut thickness.²

  Average visibility comparison²

  (Higher is better)

  

  1. Cobalt alloy shell
  2. Platinum iridium core

  

  Resolute Onyx cobalt alloy shell and platinum-iridum core

  ---

  Smooth side branch access

  Resolute Onyx DES has round struts to create a smooth passage when accessing the side branch and lower the propensity to catch during bifurcation procedures.²

  Strut comparison

  Rounded strut cross-section

  1. Resolute Onyx DES

  

  Square strut cross-section

  1. SYNERGY™* DES
  2. XIENCE™* DES

  

  ---

  Broadest diameter range

  • Complex PCI requires a broad DES size matrix to match a wide range of patient anatomies.
  • Resolute Onyx is the only DES with diameters ranging from 2.0 mm to 5.0 mm to treat a broad range of coronary vessel sizes.

  Columns

  Diameter (mm)	Stent Length (mm)									Maximum Expansion Capabilities (MSID†) (mm)
  2.00	8	12	15	18	22	26	30	—	—	3.50‡
  2.25	8	12	15	18	22	26	30	34	38	3.50‡
  2.50	8	12	15	18	22	26	30	34	38	3.50‡
  2.75	8	12	15	18	22	26	30	34	38	4.00‡
  3.00	8	12	15	18	22	26	30	34	38	4.00‡
  3.50	8	12	15	18	22	26	30	34	38	5.00‡
  4.00	8	12	15	18	22	26	30	34	38	5.00‡
  4.50	—	12	15	18	22	26	30	—	—	6.00‡
  5.00	—	12	15	18	22	26	30	—	—	6.00‡

  PRODUCT DETAILS

  Stent Diameter (mm)	Stent Length (mm)
  	8	12	15	18	22	26	30	34	38
  2.00	RONYX20008X	RONYX20012X	RONYX20015X	RONYX20018X	RONYX20022X	RONYX20026X	RONYX20030X	N/A	N/A
  2.25	RONYX22508X	RONYX22512X	RONYX22515X	RONYX22518X	RONYX22522X	RONYX22526X	RONYX22530X	RONYX22534X	RONYX22538X
  2.50	RONYX25008X	RONYX25012X	RONYX25015X	RONYX25018X	RONYX25022X	RONYX25026X	RONYX25030X	RONYX25034X	RONYX25038X
  2.75	RONYX27508X	RONYX27512X	RONYX27515X	RONYX27518X	RONYX27522X	RONYX27526X	RONYX27530X	RONYX27534X	RONYX27538X
  3.00	RONYX30008X	RONYX30012X	RONYX30015X	RONYX30018X	RONYX30022X	RONYX30026X	RONYX30030X	RONYX30034X	RONYX30038X
  3.50	RONYX35008X	RONYX35012X	RONYX35015X	RONYX35015X	RONYX35022X	RONYX35026X	RONYX35030X	RONYX35034X	RONYX35038X
  4.00	RONYX40008X	RONYX40012X	RONYX40015X	RONYX40018X	RONYX40022X	RONYX40026X	RONYX40030X	RONYX40034X	RONYX40038X
  4.50	N/A	RONYX45012X	RONYX45015X	RONYX45018X	RONYX45022X	RONYX45026X	RONYX45030X	N/A	N/A
  5.00	N/A	RONYX50012X	RONYX50015X	RONYX50018X	RONYX50022X	RONYX50026X	RONYX5

• 

  wishlist

  Launcher- 8f Guiding Catheter’s

  EBU@ (Extra Backup)

  LA8EBU30 (EBU 3.0)

  LA8EBU35 (EBU 3.5)

  LA8EBU375 (EBU 3.75)

  LA8EBU40 (EBU 4.0)

  LA8EBU45 (EBU 4.5)

  LA8EBU50 (EBU 5.0)

  JL@ (Judkin Left )

  LA8JL30 (JL 3.0)

  LA8JL35 (JL 3.5)

  LA8JL40 (JL 4.0)

  LA8JL45 (JL 4.5)

  LA8JL50 (JL 5.0)

  LA8JL60 (JL 6.0)

  JR@ (Judkin Right )

  LA8JR30 (JR 3.0)

  LA8JR35 (JR 3.5)

  LA8JR40 (JR 4.0)

  LA8JR45 (JR 4.5)

  LA8JR50 (JR 5.0)

  LA8JR60 (JR 6.0)

  AL@ (Amplatz Left )

  LA8AL75 (AL .75)

  LA8AL10 (AL 1.0)

  LA8AL15 (AL 1.5)

  LA8AL20 (AL 2.0)

  LA8AL25 (AL 2.5)

  LA8AL30 (AL 3.0)

  LA8AL40 (AL 4.0)

  SAL@ (Short Amplatz Left)

  LA8SAL75 (SAL . 75)

  LA8SAL10 (SAL 1.0)

  LA8SAL15 (SAL 1.5)

  LA8SAL20 (SAL 2.0)

  LA8SAL25 (SAL 2.5)

  LA8SAL30 (SAL 3.0)

  LA8SAL40 (SAL 4.0)

  AR@ (Amplatz Right)

  LA8AR10 (AR 1.0)

  LA8AR20 (AR 2.0)

  LA8ALR12 (ALR 1.2)

  ECR Curves@ (Backup Support Right)

  LA8ECR35 (ECR 3.5)

  LA8ECR40 (ECR 4.0)

  LA8ECR45 (ECR 4.5)

  LA8RBU35 (RBU 3.5)

  LA8RBU40 (RBU 4.0)

  SCR@ (Shepherd’s Crook Right)

  LA8SCR35 (SCR 3.5)

  LA8SCR40 (SCR 4.0)

  LA8SCR50 (SCR 5.0)

  SAR@ (Short Amplatz Right)

  LA8SAR10 (SAR 1.0)

  LA8SAR20 (SAR 2.0)

  Multipurpose@

  LA8MB1 (MB 1)

  LA8MB2 (MB 2)

  LA8HSREL (Hockey Stick)

  LA8HSI (Hockey I)

  LA8HSII (Hockey II)

  LA8HSIII (Hockey III)

  Bypass Crafts@

  LA8LCB (LCB)

  LA8RCB (RCB)

  LA8RCB (RCB III)

  LA8RCB (RCB  90cm)

  LA8IMA (IMA)

  LA8IMA (IMA  90cm)

• 

  Rated 4.00 out of 5

  wishlist

  PTCA Balloon Ryurei

  Description

  Confidence in your hands

  Ryurei™ has superior crossability¹ thanks to the combination of low distal profiles and Terumo’s hydrophilic M coating. The short balloon bonding and reinforced shaft¹ results in enhanced trackability¹ while maintaining excellent pushability¹.

  These features can increase physician’s confidence in success even during complex procedures.

  Characteristics

  Excellent Pusability

  The combination of flexible distal part,  tapered core wire on the midshaft and the thick proximal hypotube, results in smooth and balanced transition across the entire catheter for high transmission force, resulting in excellent pushability

  Superior Crossability²

  Thanks to the combination of distal  low profiles and the Terumo hydrophilic M-Coat, Ryurei offers low friction in crossing tight lesions

  Enhanced Trackability²

  With an optimal tip design and improved balloon bonding, Ryurei provides enhanced trackability, even in tortuous anatomy and difficult to navigate vessels.

  

   

  General specifications

  ​Shaft diameter	​1.9 Fr/0.64 mm Proximal • 2.5 Fr/0.84 mm Middle • 2.4 Fr/0.79 mm to 2.7 Fr/0.89 mm (tapered) Distal (1.00 to 1.50 mm) • 2.6 Fr/0.87 mm Distal (2.00 to 4.00 mm)
  ​Usable length	​145 cm
  ​Balloon markers #	​1(Ø1.0 to Ø 1.5 mm) • 2(Ø2.0 to Ø4.0 mm)
  ​Nominal pressure	​6 atm / 608 kPa
  ​Rated burst pressure	Ø1.0 – 3.0 mm=14 atm(1419kPa) • Ø3.25 – 4.0 mm = 12 atm(1216 kPa)
  ​Guidewire compatibility	​Maximum diameter: 0.014″ / 0.36 mm
  ​Lesion entry profile	​0.41 mm (Ø1.00 to Ø1.50 mm) • 0.43 mm (Ø2.00 to Ø4.00 mm)
  ​Coating	​Hydrophilic

  Item specifications

  Balloon length / Product code​ ​ ​ ​ ​ ​ ​
  Balloon Diameter	5 mm	10 mm	15 mm	20 mm	30 mm	40 mm
  1.00 mm	DC-RR1005HH
  ​1.25 mm	​DC-RR1205HH	​​DC-RR1210HH	​​DC-RR1215HH	​​DC-RR1220HH	​	​
  1.50 mm	DC-RR1505HH	DC-RR1510HH	DC-RR1515HH	DC-RR1520HH
  2.00 mm		DC-RR2010HHW	DC-RR2015HHW	DC-RR2020HHW	DC-RR2030HHW	DC-RR2040HHW
  2.25 mm		DC-RR2210HHW	DC-RR2215HHW	DC-RR2220HHW
  2.50 mm		DC-RR2510HHW	DC-RR2515HHW	DC-RR2520HHW	DC-RR2530HHW	DC-RR2540HHW
  2.75 mm		DCRR2710HHW	DC-RR2715HHW	DC-RR2720HHW
  3.00 mm		DC-RR3010HHW	DC-RR3015HHW	DC-RR3020HHW	DC-RR3030HHW	DC-RR3040HHW
  3.25 mm		DC-RR3210HHW	DC-RR3215HHW	DC-RR3220HHW
  3.50 mm		DC-RR3510HHW	DC-RR3515HHW	DC-RR3520HHW	DC-RR3530HHW	DC-RR3540HHW
  3.75 mm		DC-RR3710HHW	DC-RR3715HHW	DC-RR3720HHW
  4.00 mm		DC-RR4010HHW	DC-RR4015HHW	DC-RR4020HHW

  References

  ¹ Ryurei φ1.00-5mm compared to Tazuna 1.25-10 mm- Data on file ISCD-416-31-4
  * For Ryurei Ø 1.00 mm – Ø 1.50 mm.
  ** For Ryurei Ø 1.00mm – 5mm ​

   

  ² Compared to Tazuna PTCA dilatation catheter

• 

  Rated 1.00 out of 5

  wishlist

  Sprinter OTW Balloon

  Sprinter OTW Semicompliant

  Balloon Dilatation Catheter

  Sprinter™ over-the-wire semicompliant balloon offers low-tip and crossing profiles with a comprehensive size matrix

  OVERVIEW

  The Sprinter™ over-the-wire (OTW) semicompliant balloon dilatation catheter is available in a broad size matrix.

  FEATURES

  MiniWrap folding is used on 1.50-4.00 balloons. The 1.50 mm balloon has two folds.

  1.  Selective Dura-Trac coating
  2.  2.5 mm tip
  3.  FasTrac tip

  Balloon’s

  1. Distal shaft
  2. Gold-swaged marker bands
  3. Selective Dura-Trac hydrophilic coating
  4. Fulcrum balloon material
  5. Proximal shaft (oval)
  6. FasTrac tip