PTCA BALLOON NC TREK
DES with most extensive clinical evidence with 50,000 patients enrolled worldwide. Facilitates early healing by abluminal gradient coating and reduced drug dose. Bifurcation Excellence. Flexible stent design. Advanced shaft technology. Reliable delivery in TRI.
The safety and effectiveness of this PTCA balloon catheter for the treatment of in-stent restenosis (ISR) has not been established. Potential Adverse Events.
The RX NC Takeru PTCA Balloon Dilatation Catheter is indicated for balloon dilatation of the stenotic portion in the coronary artery or bypass graft stenosis.
47732 – Basic Coronary Angioplasty Balloon Catheter … MINI TREK RX Coronary Dilatation Catheters. Catalog Numbers. Balloon Length. 6mm 8mm 12mm 15mm.
TECHNICAL INFORMATION
| NC TREK™ CORONARY DILATATION CATHETER | |
|---|---|
| NOMINAL PRESSURE (NP) | 12 atm |
| RATED BURST PRESSURE (RBP) | 18 atm |
| TIP ENTRY PROFILE | 0.020 in average (3.00 mm Ø) 0.022 in maximum (1.50 mm – 3.25 mm Ø) 0.024 in maximum (3.50 mm – 5.00 mm Ø) |
| CROSSING PROFILE | 0.027 in average (3.00 mm Ø) 0.032 in maximum (1.50 – 3.50 mm Ø) 0.037 in maximum (3.75 – 5.00 mm Ø) |
| RX NOTCH DIAMETER | 2.6 French average (3.00 mm Ø) 2.9 French maximum |
| TIP LENGTH | 3.5 +/- 0.5 mm (2.00 – 3.25 mm Ø) 4.5 +/- 0.5 mm (3.50 – 4.50 mm Ø) |
| BALLOON MATERIAL | Pebax‡, non-compliant |
| MARKER MATERIAL | Flexible Tungsten/Pebax‡ |
| SHAFT LENGTH | 143 cm |
| COATING | Hydrophilic |
| MAXIMUM GUIDE WIRE COMPATIBILITY | 0.014 in |
| LATEX FREE | Yes |
ORDERING INFORMATION
Broad Size Matrix with 59 Sizes Available
| BALLOON DIAMETER (MM) |
BALLOON LENGTH (MM) | ||||||
|---|---|---|---|---|---|---|---|
| 6 | 8 | 12 | 15 | 20 | 25 | ||
| NC TREK™ RX |
1.50 | 1012444-06 | 1012444-08 | 1012444-12 | 1012444-15 | 1012444-20 | – |
| 2.00 | 1012445-06 | 1012445-08 | 1012445-12 | 1012445-15 | 1012445-20 | – | |
| 2.25 | 1012446-06 | 1012446-08 | 1012446-12 | 1012446-15 | 1012446-20 | – | |
| 2.50 | 1012447-06 | 1012447-08 | 1012447-12 | 1012447-15 | 1012447-20 | 1012447-25 | |
| 2.75 | 1012448-06 | 1012448-08 | 1012448-12 | 1012448-15 | 1012448-20 | – | |
| 3.00 | 1012449-06 | 1012449-08 | 1012449-12 | 1012449-15 | 1012449-20 | 1012449-25 | |
| 3.25 | 1012450-06 | 1012450-08 | 1012450-12 | 1012450-15 | 1012450-20 | – | |
| 3.50 | 1012451-06 | 1012451-08 | 1012451-12 | 1012451-15 | 1012451-20 | 1012451-25 | |
| 3.75 | – | 1012452-08 | 1012452-12 | 1012452-15 | 1012452-20 | – | |
| 4.00 | – | 1012453-08 | 1012453-12 | 1012453-15 | 1012453-20 | – | |
| 4.50 | – | 1012454-08 | 1012454-12 | 1012454-15 | 1012454-20 | – | |
| 5.00 | – | 1012455-08 | 1012455-12 | 1012455-15 | 1012455-20 | – | |
COMPLIANCE CHART
| INFLATION PRESSURE (ATM) |
BALLOON DIAMETER (MM) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.50 | 2.00 | 2.25 | 2.50 | 2.75 | 3.00 | 3.25 | 3.50 | 3.75 | 4.00 | 4.50 | 5.00 | |
| 2 | 1.36 | 1.75 | 1.97 | 2.11 | 2.34 | 2.52 | 2.74 | 2.99 | 3.21 | 3.35 | 3.76 | 4.25 |
| 3 | 1.37 | 1.78 | 1.99 | 2.19 | 2.38 | 2.58 | 2.84 | 3.05 | 3.29 | 3.45 | 3.87 | 4.35 |
| 4 | 1.38 | 1.81 | 2.02 | 2.22 | 2.43 | 2.63 | 2.89 | 3.11 | 3.35 | 3.52 | 3.93 | 4.43 |
| 5 | 1.39 | 1.84 | 2.04 | 2.26 | 2.47 | 2.68 | 2.95 | 3.18 | 3.41 | 3.59 | 3.99 | 4.50 |
| 6 | 1.41 | 1.87 | 2.09 | 2.30 | 2.51 | 2.73 | 3.01 | 3.23 | 3.47 | 3.65 | 4.06 | 4.58 |
| 7 | 1.42 | 1.90 | 2.13 | 2.34 | 2.55 | 2.78 | 3.06 | 3.29 | 3.53 | 3.71 | 4.13 | 4.66 |
| 8 | 1.43 | 1.93 | 2.16 | 2.38 | 2.58 | 2.83 | 3.10 | 3.34 | 3.59 | 3.77 | 4.20 | 4.73 |
| 9 | 1.45 | 1.95 | 2.19 | 2.42 | 2.63 | 2.87 | 3.15 | 3.37 | 3.63 | 3.83 | 4.26 | 4.80 |
| 10 | 1.46 | 1.98 | 2.22 | 2.45 | 2.66 | 2.91 | 3.16 | 3.42 | 3.67 | 3.87 | 4.32 | 4.86 |
| 11 | 1.47 | 2.00 | 2.24 | 2.48 | 2.69 | 2.94 | 3.23 | 3.46 | 3.71 | 3.91 | 4.37 | 4.91 |
| 12 NP | 1.49 | 2.01 | 2.26 | 2.50 | 2.71 | 2.97 | 3.26 | 3.49 | 3.74 | 3.95 | 4.41 | 4.96 |
| 13 | 1.50 | 2.03 | 2.28 | 2.53 | 2.73 | 3.00 | 3.28 | 3.51 | 3.77 | 3.98 | 4.45 | 5.00 |
| 14 | 1.51 | 2.04 | 2.30 | 2.55 | 2.76 | 3.02 | 3.31 | 3.54 | 3.80 | 4.01 | 4.49 | 5.04 |
| 15 | 1.52 | 2.06 | 2.32 | 2.57 | 2.78 | 3.04 | 3.34 | 3.57 | 3.82 | 4.04 | 4.53 | 5.08 |
| 16 | 1.53 | 2.07 | 2.33 | 2.59 | 2.79 | 3.07 | 3.36 | 3.60 | 3.85 | 4.07 | 4.57 | 5.12 |
| 17 | 1.53 | 2.09 | 2.35 | 2.62 | 2.82 | 3.09 | 3.39 | 3.62 | 3.88 | 4.10 | 4.60 | 5.16 |
| 18 RBP | 1.54 | 2.10 | 2.37 | 2.64 | 2.84 | 3.11 | 3.41 | 3.65 | 3.91 | 4.13 | 4.64 | 5.20 |
| 19 | 1.55 | 2.12 | 2.39 | 2.67 | 2.86 | 3.14 | 3.44 | 3.68 | 3.93 | 4.16 | 4.68 | 5.24 |
| 20 | 1.56 | 2.13 | 2.41 | 2.69 | 2.88 | 3.16 | 3.47 | 3.71 | 3.96 | 4.19 | 4.72 | 5.28 |
| 21 | 1.57 | 2.15 | 2.42 | 2.72 | 2.90 | 3.18 | 3.50 | 3.75 | – | 4.22 | 4.76 | 5.33 |
| 22 | 1.58 | 2.17 | 2.45 | 2.75 | 2.93 | 3.21 | – | 3.78 | – | 4.25 | – | 5.37 |
Related products
-
Heartrail® II – PTCA Guiding Catheter
Heartrail® II – PTCA Guiding Catheter
Heartrail II is developed to maximize your back-up force when using right and left Ikari curves during transradial interventions and through its innovative 5-in-6 system.
Its high-strength wire braiding provides exceptional kink-resistance in tortuous blood vessels, while assuring superior torque response. It also has gentle tip and powerful shaft performance.
General Specifications
Shaft inner layer material Polytetrafluoroethylene – PTFE Braiding High strength flat wire mesh pattern Inner diameter 5 Fr – 0.059″ (1.50 mm)
6 Fr – 0.071″ (1.80 mm)
7 Fr – 0.081″ (2.06 mm)Usable length 100 cm
120 cm – Heartrail 5 in 6 systemSizes Available Item Code AL Short Tip 6F TCO06GC-F6AL1SON AL0.75/6F TCO06GC-F6AL0G0N AL1.0/6F TCO06GC-F6AL010N BL3.0/6F TCO06GC-F6BL300N BL3.5/6F TCO06GC-F6BL350N BL3.5/7F TCO06GC-F7BL350N BL4.0/6F TCO06GC-F6BL400N IKARI IL 3.5/5F TCO06GC-F5IL350N IKARI IL 3.5/6F TCO06GC-F6IL350N IKARI IL 4.0/6F TCO06GC-F6IL400N IKARI RIGHT 1.5/6F TCO06GC-F6IR150N Sizes Available Item Code JL3.5/5F TCO06GC-F5JL350N JL3.5/6F TCO06GC-F6JL350N JL4.0/6F TCO06GC-F6JL400N JR3.5/5F TCO06GC-F5JR350N JR3.5/6F TCO06GC-F6JR350N JR4.0/5F TCO06GC-F5JR400N JR4.0/6F TCO06GC-F6JR400N JR4.0/7F TCO06GC-F7JR400N MULTIPURPOSE 6F TCO06GC-F6MP010N TR4.0/6F TCO06GC-F6TR400N Description
Optimize your challenging procedure
Heartrail™ II will improve your back-up force when using Ikari curves right and left during transradial interventions or through a 5Fr guiding catheter in 6Fr to increase backup support.
Characteristics
Heartrail™ II offers dedicated curves for radial access:- Ikari curves right and left are developed to improve your back-up force during TRI via the right radial artery
- Tiger curves are designed to be used for both right and left coronary arteries
Feel the difference with the 5Fr guiding catheter in 6Fr
By inserting a 5 Fr (120 cm with flexible distal portion) into a 6 Fr guiding catheter:
- Provides the back-up support of a 7 Fr guiding catheter with a 6 Fr
- Minimizes puncture size
- Increases your back-up support for an excellent PTCA balloons crossing success rate1
General specifications
Shaft inner layer material Polytetrafluoroethylene – PTFE Braiding High strength flat wire mesh pattern Inner diameter 5 Fr – 0.059″ (1.50 mm)
6 Fr – 0.071″ (1.80 mm)
7 Fr – 0.081″ (2.06 mm)Usable length 100 cm
120 cm – Heartrail 5Fr straight, for 5Fr guiding catheter in 6FrItem specifications
Shape type Shape code 5 Fr 6 Fr 7 Fr Amplatz Left AL 1 GC-K5AL010N GC-K6AL010N GC-K7AL010N AL 2 GC-K5AL020N GC-K6AL020N GC-K7AL020N AL 3 GC-K5AL030N GC-K6AL030N GC-K7AL030N Amplatz Right AR 1 GC-K5AR010N GC-K6AR010N GC-K7AR010N AR 2 GC-K5AR020N GC-K6AR020N GC-K7AR020N Judkins Left JL 3 — GC-K6JL300N — JL 3.5 GC-K5JL350N GC-K6JL350N GC-K7JL350N JL 4 GC-K5JL400N GC-K6JL400N GC-K7JL400N JL 4.5 GC-K5JL450N GC-K6JL450N — JL 5 GC-K5JL500N GC-K6JL500N GC-K7JL500N JL 6 GC-K5JL600N GC-K6JL600N — Judkins Right JR 3 — — — JR 3.5 GC-K5JR350N GC-K6JR300N GC-K7JR350N JR 3.5 — GC-K6JR350N — JR 4 GC-K5JR400N GC-K6JR400N GC-K7JR400N JR 4.5 GC-K5JR450N — — JR 5 GC-K5JR500N GC-K6JR500N — JR 6 — GC-K6JR600N — BackUp for
left coronary BL 2.5 — — — BL 3 GC-K5BL300N GC-K6BL300N GC-K7BL300N BL 3.5 GC-K5BL350N GC-K6BL350N GC-K7BL350N BL 4 GC-K5BL400N GC-K6BL400N GC-K7BL400N BL 4.5 GC-K5BL450N GC-K6BL450N GC-K7BL450N BackUp for
right coronary BR 3.5 — GC-K6BR350N — BR 4 — GC-K6BR400N — IMA IMA 1.0 GC-K5IMA10N GC-K6IMA10N GC-K7IMA10N Multipurpose MPA-Large GC-K5MP030N GC-K6MP030N GC-K7MP030N
Bypass BP-L GC-K5BP010N — — BP-R GC-K5BP020N GC-K6BP020N — Ikari-Curve
Left IL 3 — GC-K6IL300N — IL 3.5 GC-K5IL350N GC-K6IL350N GC-K7IL350N IL 4 GC-K5IL400N GC-K6IL400N GC-K7IL400N IL 4.5 — GC-K6IL450N — Ikari-Curve
Right IR 1 — GC-K6IR100N — IR 1.5 GC-K5IR150N GC-K6IR150N GC-K7IR150N IR 2 GC-K5IR200N GC-K6IR200N GC-K7IR200N Tiger TIG 5 GC-K5TR500N — — — — — — GC-K7TR500N — — — GC-K6MP020N — — — — GC-K6TR500N — — — — GC-K6MP010N — — — — GC-K6MP010N — 5Fr guiding catheter in 6Fr Straight GC-K5ST012NQ — — -
(OPTEASE/TRABEASE) IVC FILTER
OPTEASE Retrievable Vena Cava Filters are an innovative option for prevention of recurrent pulmonary embolism.
Product Description
OPTEASE Retrievable Vena Cava Filters are an option for prevention of pulmonary embolism.
- Dual-layer filtration for easier clot capture and prevention of pulmonary embolism
- Fixation barb minimizes migration to maintain clot capture efficiency
- Caudal filter retrieval hook for easy retrieval with any appropriate endovascular snare
- Caval coverage up to 30 mm
- Nitinol technology No waiting period is required between filter placement and having an MRI
One OPTEASE Retrievable Vena Cava Filter kit provides more options:
- 90cm kit allows filter delivery through six entry sites (right and left femoral, jugular, and antecubital veins)
- 55cm kit allows filter delivery through four entry sites (right and left femoral and jugular veins)
- No need to change systems when changing access sites.
Cordis Optease & trabease IVC Filter Injuries Cordis Corporation makes the Optepse and Trapease IVC filters, which are designed to prevent pulmonary embolisms Unfortunately, recent studies have found alarming rates of filter fracture, perforation, migration, and tilting when the filters are not removed after a few months.
Cordis Corporation makes two IVC filters, the OptEase and TrapEase. These devices are implanted in the inferior vena cava (IVC) to block blood clots from the leg before they cause pulmonary embolism.
The Cordis Trabease is a permanent vena cava filter, which was approved by the FDA in 2001.
-
GUIDING CATHETER (VISTA/ADROIT)
The ADROIT® Guiding Catheter 6F, with a large .072″ ID, is engineered to give you more space to maneuver, with optimal back-up support. The result: more options for treating a wide range of cases.The ADROIT™Guiding Catheter 5F has a .058″ ID
.072” ID improves device compatibility and provides better visualization.
Easier to perform kissing balloon procedures.
Innovative hybrid braided wire technology enables larger lumen with optimal back-up support.
PTFE lining provides lubricious lumen for smoother delivery.Cordis ADROIT Guide OD: 6F (2.1 mm) Guide ID: 0.072″ (1.83 mm) Braiding: Stainless Steel Liner: PTFE (polytetrafluoroethylene) Ordering Information Outer Coat: Blue Tip Color: Yellow Tip Length: 0.2″ (5.1 mm) Amplatz Left Judkins Right Judkins Left Extra Back-up Left XBLAD 3.5 Extra Back-up Right Transracial Technique Left Coronary Bypass Internal Mammary Hockey Stick SH: Side Hole Essential Prescribing Information Indications: The guiding catheter is intended for use for intravascular introduction of interventional/diagnostic devices into the coronary or peripheral vascular systems….
Cordis ADROIT .072 ” PTFE lining throughout Designed with Constructed with ADVANCED MULTI-SEGMENT DESIGN .072″ Flexible distal segment and soft, longer radiopaque tip allow: Shape retention during lengthy procedures Active engagement for additional back-up support LARGEST INNER diameter ” 72 .0 .072″ ID to improve device compatibility and provide better visualization Better kink resistance and whip % Atraumatic placement with high visibility Innovative hybrid design features two different sizes of wire braid 0.2″ soft, longer tip provides high visibility with additional support for precise,
Cordis ADROIT largest lumen. optimal support. The ADROIT Guiding Catheter – 6F, with a large .072″ ID, is engineered to give you more space to maneuver, with optimal back-up support. The result: more options for treating a wide range of cases. ™ MORE space to work Larger ID provides easier advancement of more devices Cordis ADROIT optimal BACK-UP SUPPORT Innovative hybrid braided wire technology and a wide range of extra back-up shapes provide optimal back-up support EXCELLENT control Advanced multi-segment designed to improve kink resistance and allow precise cannulation Atraumatic Tip for Safety Flexible distal segment and soft, longer tip allow atraumatic placement and stability Want to know more? Call your Cordis Corporation representative today. Introducing the latest innovation in guiding catheters. 6F .072″ ID ADROIT Guiding Catheter ™ Largest Lumen. Optimal Support.
-
INFLATION DEVICE
Inflation device:
To be used to inflate and deflate an angioplasty balloon or other interventional device, and to measure the pressure within the balloon. Accute pressure control Stable Perfomance T handle – Easy to hold and quick-release handle
(1)Pressure capability available: 30atm (440psi) &40atm (588psi), gauge accuracy 0.1atm.
(2)Volume: 20 ml syringe volume.
(3)Length30cm 1200psi extension tube .
(4)Luminescent gauge for easy and accurate readings in dimmed lighting.
(5)Clear polycarbonate Barrel with accurate scale for better visualization of bubbles in the device.
(6)Coarse threads and small diameter barrel enable faster inflation.
(7)Medium pressure (500psi) 3 ways stopcock with vented cap.
(8)Ergonomic Handle design enable one-hand operation.
(9)Can be packaged with a wide variety of angioplasty kits and procedure packs – Y connector pack.
Reviews
There are no reviews yet.