Related products

• 

  wishlist

  FINECROSS Microcatheter

  FINECROSS^® MG Coronary Micro-Guide Catheter

  Product Code	Catheter Length	Distal Hydrophilic Coating	Distal Outer Diameter	Proximal Outer Diameter	Distal Inner Diameter	Proximal Inner Diameter	Recommended Guidewire Size
  35-1430	130cm	70cm	1.8Fr. (0.60mm)	2.6 Fr. (0.87mm)	0.018″ (0.45mm)	0.021″ (0.55mm)	0.014″ (0.36mm)
  35-1450	150cm	90cm	1.8Fr. (0.60mm)	2.6 Fr. (0.87mm)	0.018″ (0.45mm)	0.021″ (0.55mm)	0.014″ (0.36mm)

  PRODUCT OVERVIEW

  Coronary microguide catheter for integration of optimal guidewire support, superior trackability and crossability.^1,2

  

  TAPERED STAINLESS STEEL BRAID CONSTRUCTION FOR OPTIMAL GUIDEWIRE SUPPORT

  FINECROSS MG stainless steel braid construction is designed to provide strength, responsiveness and support for improved pushability to access and cross complex lesions.

  13cm FLOPPY DISTAL SEGMENT FOR SUPERIOR TRACKABILITY¹

  The distal 13 cm is ultra flexible for improved trackability around tight bends and tortuous anatomy.The floppy distal segment is designed to be atraumatic and provide an optimal balance between trackability and safety while navigating through the tortuous anatomy.¹

  TAPERED OUTER DIAMETER FOR SUPERIOR CROSSABILITY^1,2

  The outer diameter of the stainless steel shaft tapers from a proximal 2.6Fr. to a distal 1.8Fr. designed for improved crossability and guidewire handling.^1,2

  DOCUMENTS

• 

  wishlist

  RADIFOCUS REDIAL SHEATH

  Providing you the best range of Terumo Radifocus Radial Introducer Sheath and Cordis Femoral Introducer Sheath with effective & timely delivery.

  The radial artery access sheath is used to gain arterial access and facilitate the insertion of catheters or other equipment for diagnostic and vascular interventions.

  • The Cordis AVANTI®+ Introducer is the pioneer of catheter sheath introducer technology. Featuring a patented SLIX Valve, the AVANTI®+ introducer provides smooth transitions, monitoring capabilities and exceptional performance for your procedural success, as well as
  • A hexacuspid design that provides a balance between catheter maneuverability and hemostasis.
  • A rotating suture collar that facilitates procedural flexibility. It stays in place and allows patient movement.
  • A kink-resistant cannula design integrating a soft, flexible inner layer with a stiffer outer layer designed to increase bendability and support, and decrease kinking.
  • Atraumatic tip transitions for both the sheath and the vessel dilator are uniquely tapered and manicured. This results in smooth insertions and helps to minimize damage upon entry.

  As part of the circulatory system, the radial artery supplies blood from the heart to the forearm.

  Radial sheaths had the smallest OD (1 Fr smaller) when compared to similar sized conventional sheaths. For instance, the OD of 4 Fr radial sheath (1.610 ± 0.006 mm) is essentially the same as the OD of the conventional 3 Fr (1.644 ± 0.016 mm) and 3.3 Fr (1.635 ± 0.005 mm) sheaths.

• 

  wishlist

  Launcher- 7f Guiding Catheter’s

  EBU@ (Extra Backup)

  LA7EBU30 (EBU 3.0)

  LA7EBU35 (EBU 3.5)

  LA7EBU375 (EBU 3.75)

  LA7EBU40 (EBU 4.0)

  LA7EBU45 (EBU 4.5)

  LA7EBU50 (EBU 5.0)

  JL@ (Judkin Left )

  LA7JL30 (JL 3.0)

  LA7JL35 (JL 3.5)

  LA7JL40 (JL 4.0)

  LA7JL45 (JL 4.5)

  LA7JL50 (JL 5.0)

  LA7JL60 (JL 6.0)

  JR@ (Judkin Right )

  LA7JR30 (JR 3.0)

  LA7JR35 (JR 3.5)

  LA7JR40 (JR 4.0)

  LA7JR45 (JR 4.5)

  LA7JR50 (JR 5.0)

  LA7JR60 (JR 6.0)

  AL@ (Amplatz Left )

  LA7AL75 (AL .75)

  LA7AL10 (AL 1.0)

  LA7AL15 (AL 1.5)

  LA7AL20 (AL 2.0)

  LA7AL25 (AL 2.5)

  LA7AL30 (AL 3.0)

  LA7AL40 (AL 4.0)

  SAL@ (Short Amplatz Left)

  LA7SAL75 (SAL . 75)

  LA7SAL10 (SAL 1.0)

  LA7SAL15 (SAL 1.5)

  LA7SAL20 (SAL 2.0)

  LA7SAL25 (SAL 2.5)

  LA7SAL30 (SAL 3.0)

  LA7SAL40 (SAL 4.0)

  AR@ (Amplatz Right)

  LA7AR10 (AR 1.0)

  LA7AR20 (AR 2.0)

  LA7ALR12 (ALR 1.2)

  ECR Curves@ (Backup Support Right)

  LA7ECR35 (ECR 3.5)

  LA7ECR40 (ECR 4.0)

  LA7ECR45 (ECR 4.5)

  LA7RBU35 (RBU 3.5)

  LA7RBU40 (RBU 4.0)

  SCR@ (Shepherd’s Crook Right)

  LA7SCR35 (SCR 3.5)

  LA7SCR40 (SCR 4.0)

  LA7SCR50 (SCR 5.0)

  SAR@ (Short Amplatz Right)

  LA7SAR10 (SAR 1.0)

  LA7SAR20 (SAR 2.0)

  Multipurpose@

  LA7MB1 (MB 1)

  LA7MB2 (MB 2)

  LA7HSREL (Hockey Stick)

  LA7HSI (Hockey I)

  LA7HSII (Hockey II)

  LA7HSIII (Hockey III)

  Bypass Crafts@

  LA7LCB (LCB)

  LA7RCB (RCB)

  LA7RCB (RCB III)

  LA7RCB (RCB  90cm)

  LA7IMA (IMA)

  LA7IMA (IMA  90cm)

• 

  Rated 1.00 out of 5

  wishlist

  Sprinter OTW Balloon

  Sprinter OTW Semicompliant

  Balloon Dilatation Catheter

  Sprinter™ over-the-wire semicompliant balloon offers low-tip and crossing profiles with a comprehensive size matrix

  OVERVIEW

  The Sprinter™ over-the-wire (OTW) semicompliant balloon dilatation catheter is available in a broad size matrix.

  FEATURES

  MiniWrap folding is used on 1.50-4.00 balloons. The 1.50 mm balloon has two folds.

  1.  Selective Dura-Trac coating
  2.  2.5 mm tip
  3.  FasTrac tip

  Balloon’s

  1. Distal shaft
  2. Gold-swaged marker bands
  3. Selective Dura-Trac hydrophilic coating
  4. Fulcrum balloon material
  5. Proximal shaft (oval)
  6. FasTrac tip